Boiler Quality, Pressure Vessel Plates & Mild Steel Plates
TYPE GRADE BREIFING OF PRODUCT

Alloy steel SA 387 CL.2


Alloy Chrome Molybdenum Steel Plates
Width : 1250/1500/2000/2500



SA387 GRADE

11, 12, 22, 22, 5, 9 CLASS 1 & CLASS. 2

Technical data sheet

 

15MO3 EN10028-2,
15MO3 EN10028-3

ASTM

204 GRADE A,

204 GRADE B,

204 GRADE C

Technical data sheet

 
This specification covers chromium-molybdenum alloy steel plates for welded boilers and pressure vessels designed for elevated temperature service. Materials considered under this specification are available in grades 2, 12, 11, 22, 22L, 5, 9 and 91. The steel materials shall be killed and shall be thermally treated. The steel specimens shall undergo heat analysis and product analysis and shall conform to the chemical requirements for carbon, manganese, phosphorus, sulfur, silicon, chromium, molybdenum, nickel, vanadium, columbium, boron, nitrogen, aluminum, titanium, and zirconium. The steel specimens shall also undergo tension tests and shall conform to the required values of tensile strength, yield strength, and elongation.

This specification covers molybdenum alloy steel plates, intended particularly for welded boilers and other pressure vessels. Plates under this specification are available in three grades having different strength levels: Grade A; Grade B; and Grade C. The steel shall be killed. The steel shall conform to the chemical requirements specified. Tension tests on plates shall conform to the requirements specified. Plates under this specification are available in three grades having different strength levels as follows:
 
Grade Tensile Strength, ksi [MPa]
A 65–85 [450–585]
B 70–90 [485–620]
C 75–95 [515–655]

     
   
       

Boiler & Pressure Vessel

Steel Plates
Width : 1250/1500/2000/2500

SA516 GRADE 55, SA516 GRADE 60, SA516 GRADE 65, SA516 GRADE 70, SA516 GRADE 70N

Technical data sheet
This specification covers carbon steel plates intended primarily for service in welded pressure vessels where improved notch toughness is important. According to different strength levels, the plates are available in four grades: Grades 55, 60, 65, and 70. The maximum thickness of plates is limited only by the capacity of the composition to meet the specified mechanical property requirements. The steel shall be killed and shall conform to fine austenitic grain size requirements. The mechanical properties such as tensile strength, yield strength, and elongation shall be determined by a tension test for the plates.
A 515/A 515M Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
A 516/A 516M Pressure Vessel Plates, Carbon Steel, for Moderate-and Lower-Temperature Service
   
Hot Rolled
Medium & Low Tensile Structural Steel
Width : 1250/ 1500 / 2000 / 250

ASTM A36,

IS 2062 GRADE A,

IS 2062 GRADE B, SS400,

S235JR, S275JR

Technical data sheet

This specification covers carbon structural steel shapes, plates, and bars of structural quality for use in riveted, bolted, or welded construction of bridges and buildings, and for general structural purposes. Heat analysis shall be used to determine the required chemical composition for carbon, manganese, phosphorus, sulfur, silicon, and copper. Tensile strength, yield strength, and elongation shall be evaluated using tension test and must conform to the required tensile properties.
 
 
Atmospheric Corrosion Resistant Steel
TYPE GRADE BREIFING OF PRODUCT
Corrosion Resistant Steel Pates (High Strength Low Alloy Steel Plates) Width : 1250/1500/2000/2500

CORTEN A HSLA CORTEN® A.

CORTEN® B ...,

ASTM 588 GR.A

JIS 3125 SPA-H

IRSM-41-97

SAILCOR

S355 J0WP,

S355 J0W

S355 J2W,

Technical data sheet

This specification covers high-strength, low-alloy structural steel shapes, plates, and bars for welded, riveted, or bolted construction with atmospheric corrosion resistance. Heat analysis shall be performed wherein the low-alloy structural steel materials shall conform to the required chemical composition for carbon, manganese, phosphorous, sulfur, silicon, nickel, chromium, molybdenum, copper, vanadium, and columbium. Steel samples shall also undergo the tensile test and conform to required values of tensile strength, yield point, and elongation.
 
 
 
Abrasion & Wear Resistant Steel Plates
TYPE GRADE BREIFING OF PRODUCT
Brinel

400 BHN,
450 BHN,
500 BHN
400 HBW,
450 HBW,
500 HBW

Wear Resistant Steel Plates Abrasion Resistant Steel Plates Width : 1500/2000/2500

Brinel
200 BHN,
250 BHN,
200 HBW,
250 HBW, Width : 1250/1500/2000/2500

Brand & tradermark names

HARDOX 400, HARDOX 450, HARDOX 500,
RAEX 400,
RAEX 450,
RAEX 500,
FORA 400,

FORA 450,

FORA 500,

QUARD 400,

QUARD 400,

QUARD 450

DILLIDUR 400 V, DILLIDUR 450 V, DILLIDUR 500 V,

JFE EH 360LE

JFE EH 400LE

AR400,

AR450,

AR500,

SUMI-HARD 400

SUMI-HARD 500


Technical data sheet

Sail hard

Tiscral

Jiscral

LAS07

Technical data sheet

WEAR RESITANT STEEL PATES is used in areas where there is likely to be a high degree of abrasion or wear of the steel plate. Steels with a high HB rating (Brinel Hardness) are intended for applications where wear or abrasion resistance is important. The benefit of using an abrasion resistant steel is that that the plant, machinery or constructions working life can be extended considerably. This can significantly improve the reliability, durability and safety of structures and equipment. It also helps to reduce the maintenance costs associated with wear and breakdown of plant. 400 HB steel is over 3 times harder than mild steel (120HB), but only a third as hard as stainless steel (1250HB). Abrasion & mechanical wear-resistant steel plates for quarries & construction machinery: gravel & stone conveying plants (routes, chutes, hoppers) & crushing plants. Shovels, diggers, graders, bulldozers, dumpers, dredging machines, crushers, grinders, screens, hoppers, mixers, moulds for concrete aggregates. Wear resistance plates for mining machinery. Extractors, unloaders, spiral chutes, crushers, grinders, screens, conveyors. Abrasion-resistant steel plates for Cement Plants & Refractory Product Plants: hoppers, crushers, chutes, cyclones, excavator buckets

 

 

 

 

 

 

 

 

200 bhn hardnes material of Indian standard from SAIL , JINDAL & TATA

Wear resistance plates for mining machinery. Extractors, unloaders, spiral chutes, crushers, grinders, screens, conveyors

 
 
High Strength & Medium Strength Structural Steel Plates
TYPE GRADE BREIFING OF PRODUCT
Quenched & Tempered Steel Plates
Width : 1500/2000/2500
High tensile steel plate
Width : 1250/1500/2000
 

 

T-1, Construction Alloys
Width : 1250/1500/2000/2500

S690QL,

NAXTRA 70,

DILLIMAX 690T, WELDOX 700E,

JFE 780LE
SUPRASLIM

Technical data sheet

IS2062 : 2006

E350, E410, E450

EN STANDARD EN10025-5

S355 / S420 / S460

SAIL STANDARD

SAILMA 300,

SAILMA 300HI,
SAILMA 350,
SAILMA 350HI,
SAILMA 450,
SAILMA 450HI


Technical data sheet

 

 

 

 

 

 

ASTM A 514 GR.B

Technical data sheet

A high strength structural steel supplied in quenched and tempered condition. The steel is designed to provide excellent welding and bending properties and it offers substantial possibilities for savings in material costs, processing and handing. Due to its high strength, it enables design of lighter, more durable and efficient products and structures.
 

Applications: - Machine building - Lifting and mobile equipment - Vehicles and transport equipment - Steel constructions - Framework structures

 

 

 

 

 

 

Nearly 3 times as strong as A36. Used as liners for construction equipment, mining machinery, chutes, wear plates, etc.

   
     
Stainless Steel, Duplex Steel, High Nickel Alloys & Titanium  Plates
TYPE GRADE BREIFING OF PRODUCT
Stainless Steel Plates

Width : 1250/1500/2000
SA240 GRADE 304, 304L, 304H, 310S, 316, 316L, 316H,
321, 321H, 347, 347H


Technical data sheet
Stainless steel is used primarily when corrosion or oxidation is a problem. The function that they perform cannot be duplicated by other materials for their cost. Over 50 years ago, it was discovered that a minimum of 12% chromium would impart corrosion and oxidation resistance to steel. Hence the definition “Stainless Steels”, are those ferrous alloys that contain a minimum of 12% chromium for corrosion resistance. This development was the start of a family of alloys which has enabled the advancement and growth of chemical processing and power generating systems upon which our technological society is based. Subsequently several important sub-categories of stainless steels have been developed. The sub-categories are austenitic, martens tic, ferritic, duplex, precipitation hardening and super alloys.
   
Duplex /Super Duplex Steel
Width : 1250/1500/2000

Duplex & Super Duplex

S32750,

S32760

SAF 2205,

SAF 2507

A category of stainless steel with high amounts of chromium and moderate nickel content. The duplex class is so named because it is a mixture of austenitic (chromium-nickel stainless class) and ferritic (plain chromium stainless category) structures. This combination was originated to offer more strength than either of those stainless steels. Duplex stainless steels provide high resistance to stress corrosion cracking (formation of cracks caused by a combination of corrosion and stress) and are suitable for heat exchangers, desalination plants, and marine applications
   
High Nickel Alloys Steel Plate

Width : 1250/1500
Trade Names and Owners of Nickel Alloys

HASTELLOY IS A REGISTERED TRADE NAME OF HAYNES INTL.

Grade:

Hastelloy C-276

Hastelloy B-2
Hastelloy B-3

INCOLOY, INCONEL, MONEL AND NIMONIC ARE REGISTERED TRADE NAMES OF THE INCO FAMILY OF COMPANIES.

Grade:

Inconel 600,

Inconel 800, Inconel 825

Monel 400 ,

Monel 500

Nimonic 75,

Nimonic 90,

INVAR IS A REGISTERED TRADEMARK OF IMPHY S.A.

Grade:
INVAR 36
Technical data sheet

An alloy whose main constituent is nickel
Nickel alloys are used extensively because of their corrosion resistance, high temperature strength and their special magnetic and thermal expansion properties.
The major alloy types that are used are:

Iron-Nickel-Chromium alloys / Stainless Steels

Copper-Nickel alloys and Nickel-Copper alloys

Nickel-Chromium and Nickel-Chromium-Iron alloys

Low Expansion Alloys / Magnetic Alloys

Commercially Pure Grade 2 titanium is the work horse of the commercially pure Ti grades. It is slightly stronger than Grade 1, but equally as corrosion resistant in a wide variety of environments.

Chemical Processing & Chlorate Manufacturing, Desalination, Architecture, Medical, Power Generation, Marine, Hydro Carbon Processing, Automotive, Aerospace